This series of roller crushers is mainly composed of rollers, roller support bearings, compression and adjustment devices, and driving devices.
. Adjustment of discharging granularity. A wedge or gasket adjustment device is installed between the two rollers. The top of the wedge device is equipped with an adjustment bolt. When the adjustment bolt pulls up the wedge, the wedge will move the movable roller. Push away from the fixed wheel, that is, the gap between the two rollers becomes larger, and the discharge granularity becomes larger. When the wedge moves downward, the gap between the two rollers of the movable roller becomes smaller under the action of the compression spring, and the discharge granularity becomes smaller. The gasket device adjusts the discharge granularity by increasing or decreasing the number or thickness of the gaskets. When the gasket is added, the gap between the two rollers becomes larger. When the gasket is reduced, the gap between the two rollers becomes smaller, and the discharge granularity becomes smaller. .
The driving mechanism is composed of two electric motors, which are driven to the sheave through a triangle belt to drag the roller, and rotate in the relative direction. When crushing materials, the materials pass through the rollers from the feed inlet and are crushed after rolling. The crushed products are discharged from under the bottom frame.
For safety, the transmission part should install a safety cover according to the actual situation.
Crusher made of manganese steel double roller crusher/roller equipment and accessories are the first choice Baohua Machinery